Top of Dash Paint
The Front speaker quit working, so I removed the part of the dash cover (with defrost
vents) that covers the speaker and replaced the speaker.
The speaker turned out to be a 4” x 10”. The replacement from Ebay had extra tabs
and a bulge that had to be cut off. I used a cutoff wheel (about 1” dia) on a dremmel
clone.
The grill’s paint was mostly degraded and was no longer a very flat finish. The back
side had some non-degraded paint that was very non-reflective. Two automotive paint
stores had no idea what this paint was.
Then I found Rust-Oleum Camouflage 279175 deep forest green. The spray can is labeled
“non-Reflective Finish” and “Ultra Flat Colors”. It turned out a bit too grey, but
a very good texture match and VERY non-reflective. (The reason for low reflective
paint is that sun hitting the dash reflects in the windshield and makes it difficult
to see. Especially driving from direct sun to shadows.)
I used Rust-Oleum “Rusty Metal Primer” 7769 to avoid having to do a really good job
removing rust.